Subaru Legacy 2005 Service Manual page 1661

9. Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.
4) Remove the hood stay holder.
5) Remove the air intake duct. <Ref. to IN(H6DO)-
8, REMOVAL, Air Intake Duct.>
6) Disconnect the connector from radiator fan con-
trol unit.
Radiator Sub Fan and Fan Motor
IN-00203
CO-02017
CO-02029
CO(H6DO)-23
7) Remove the bolts which hold sub fan shroud to
radiator.
8) Lift-up the vehicle.
9) Remove the under cover.
10) Remove the radiator sub fan shroud through
the under side of vehicle.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
7.5 N m (0.76 kgf-m, 5.5 ft-lb)
C: DISASSEMBLY
1) Remove the nut which holds fan itself onto fan
motor and shroud assembly.
COOLING
CO-00129
CO-00129
CO-00136