Subaru Legacy 2005 Service Manual page 1579

14.Front Chain Cover
A: REMOVAL
1) Remove the crank pulley. <Ref. to ME(H6DO)-
44, REMOVAL, Crank Pulley.>
2) Remove the front chain cover.
NOTE:
Chain cover installation bolt has three different siz-
es. To prevent the confusion in installation, keep
these bolts on container individually.
(C)
(C)
(A) M6 × 16
(B) M6 × 30
(C) M6 × 45
*: Sealing washer
B: INSTALLATION
1) Remove the used liquid gasket from mating sur-
face, and degrease it.
2) Apply liquid gasket to the mating surface of front
chain cover.
Liquid gasket:
THREE BOND 1280B (Part No. K0877YA018)
Applying liquid gasket diameter:
± ±
2.5 0.5 mm (0.098
Front Chain Cover
(A)
(B)
(A)
(B)
ME-02029
0.020 in)
ME-02385
ME(H6DO)-45
3) Install the front chain cover. Temporarily tighten
the bolts.
CAUTION:
Do not install the bolts in wrong place.
(C)
(C)
(A) M6 × 16
(B) M6 × 30
(C) M6 × 45
*: Sealing washer
MECHANICAL
(A)
(B)
(A)
(B)
ME-02029