Subaru Legacy 2005 Service Manual page 1656

Radiator
COOLING
15) Fill engine coolant.
<Ref. to CO(H6DO)-11, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
16) Check the ATF level.
<Ref. to 5AT-28, INSPECTION, Automatic Trans-
mission Fluid.>
17) Install the collector cover.
C: INSPECTION
1) Remove the radiator cap, top off the radiator with
coolant, and then attach the tester in place of cap.
CO-00127
2
2) Apply a pressure of 157 kPa (1.6 kgf/cm , 23
psi) to the radiator to check if:
• Engine coolant leaks at/around radiator.
• Engine coolant leaks at/around hoses or connec-
tions.
CAUTION:
• Engine should be turned off.
• Wipe engine coolant from check points in ad-
vance.
• Be careful to prevent engine coolant from
spurting out when removing tester.
• Be careful not to deform the filler neck of ra-
diator when installing or removing the tester.
CO(H6DO)-18