Subaru Legacy 2005 Service Manual page 1529

3. Air Cleaner Case
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake duct. <Ref. to IN(H6DO)-
8, REMOVAL, Air Intake Duct.>
3) Disconnect the connector from mass air flow and
intake air temperature sensor.
4) Loosen the clamp (A) which connects air cleaner
case to intake duct.
5) Remove the clip (B) from the upper side of air
cleaner case.
(B)
Air Cleaner Case
IN-00203
IN-02009
(A)
IN-02011
IN(H6DO)-5
6) Remove the air cleaner case (rear) and air
cleaner element.
7) Remove the bolt (A) and nut (B) which hold air
cleaner case on the body.
(B)
8) Remove the air cleaner case (front).
INTAKE (INDUCTION)
IN-00206
(A)
IN-00208