Table of Contents
Advertisement
COOLING
8. Radiator Main Fan and Fan
Motor
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.
4) Remove the hood stay holder.
5) Remove the air intake duct. <Ref. to IN(H6DO)-
8, REMOVAL, Air Intake Duct.>
6) Disconnect the connector from radiator fan con-
trol unit.
7) Lift-up the vehicle.
8) Remove the under cover.
9) Drain engine coolant completely.
<Ref. to CO(H6DO)-11, DRAINING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
10) Disconnect the ATF hose from the clip of radi-
ator main fan shroud. (model without ATF warmer)
11) Remove the radiator main fan motor harness
from clip.
12) Lower the vehicle.
Radiator Main Fan and Fan Motor
IN-00203
CO-02017
CO-02029
CO(H6DO)-20
13) Remove
the
reservoir
CO(H6DO)-25, REMOVAL, Reservoir Tank.>
14) Disconnect the inlet hose from radiator.
15) Remove the radiator sub fan motor assembly.
16) Remove the radiator main fan motor assembly.
NOTE:
When removing the main fan assembly with lifting it
up, the main fan shroud contacts to inlet part of en-
gine coolant. To avoid contacting it, move the main
fan assembly to sub fan assembly side before re-
moval.
tank.
<Ref.
to
CO-02020
CO-00129
CO-00130
Advertisement
Chapters
Table of Contents
