Configuring Physical Port Parameters On Fast Ethernet Ports; Module Information Dialog Box - Avaya Cajun P550R User Manual

Avaya p550r: user guide

Hide thumbs Also See for Cajun P550R:

Table of Contents

Configuring Physical Port Parameters on Fast Ethernet Ports

Physical Port

using the Web

Cajun P550/P880/P882 Switch User Guide

You can configure ports on a Fast Ethernet module using either the

web agent or CLI commands.

To configure ports on a Fast Ethernet module using the web agent:

1. Select Configuration from Modules & Ports group on the web

agent window. The Module Information dialog box opens

(Figure 5-4).

Figure 5-4. Module Information Dialog Box

2. Select the checkbox in the Slot column next to the Fast

Ethernet module on which you want configure the physical

port parameters.

3. Select the number in the Ports column for the Fast Ethernet

module that you want to configure. The Physical Port

Configuration window opens (Figure 5-5).

Configuring Port Parameters

Cajun p880 Cajun p882