Chapter 5
Configuring Physical Port Parameters on Gigabit Ports
Configuring
Physical Port
Parameters on
Gigabit Ports
Using the Web
Agent
5-14
You can configure the physical port parameters on Gigabit ports
using either the web agent or the CLI.
To configure ports on a gigabit module using the web agent:
1. Select Configuration from the Modules & Ports group on the
web agent window. The Module Information dialog box
opens (Figure 5-1).
Figure 5-1. Module Information Dialog Box
2. Select the checkbox in the Slot column for the Gigabit
module that you want to configure. The Physical Port
Configuration dialog box for that module opens
(Figure 5-2).
Cajun P550/P880/P882 Switch User Guide