Table of Contents
Advertisement
Chapter 3
CLI Command
Displaying Cooling System Statistics
Web Agent
Procedure
3-16
two of the three power supplies. The third power supply is a
redundant power supply and is used only if one of the other
power supplies fails.
To display your switch's power system statistics using the CLI, enter the
following command from the User mode:
> show system power
You can display the statistics for your switch's cooling system from either
the Web Agent or CLI.
To display your switch's cooling system statistics using the Web Agent:
1. In the navigation pane, expand the System > Configuration folders, and
then click Cooling System.
The Cooling System Web page is displayed in the content pane and
displays the status of your switch's cooling system. See
the P580 switch, or
Figure 3-9. P580 Cooling System Status Web Page
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Figure 3-10
for the P882 switch.
Figure 3-9
for
Advertisement
Table of Contents
