Displaying System Information - Avaya 3500 series Getting Started

Example
The following figure provides a sample of the show cli command.
3524GT-PWR+(config)#show cli info
Inactivity Timeout:
Login Timeout: 1 minute(s)
Login Retries: 3
More: True
Screen Lines: 23
3524GT-PWR+(config)#
Variable definitions
The following table describes the parameters for the show cli command.
info
mode
password
type

Displaying system information

Display the current system characteristics.
Important:
You must enable and configure SNTP to display GMT time. Refer to
Protocol (SNTP)
Before you begin
Procedure
1. Log on to ACLI in Privileged EXEC command mode.
2. At the command prompt, enter the following command:
Getting Started
show cli {info | mode | password [type]}
15 minute(s)
Variable
on page 55 for more details.
Value
Displays general Console settings
Displays ACLI mode
Displays ACLI user names and passwords
Displays password types
Displaying system information
Simple Network Time
March 2013 49