Displaying Ip Source Guard Bindings; Configuration Example For Ip Source Guard; Additional References For Ip Source Guard - Cisco Nexus 5000 Series Configuration Manual

Configuring IP Source Guard
Command or Action
Step 4
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config

Displaying IP Source Guard Bindings

Use the show ip verify source command to display IP-MAC address bindings.

Configuration Example for IP Source Guard

This example shows how to create a static IP source entry and then how to enable IP Source Guard on an
interface.
ip source binding 10.5.22.17 001f.28bd.0013 vlan 100 interface ethernet 2/3
interface ethernet 2/3
no shutdown
ip verify source dhcp-snooping-vlan

Additional References for IP Source Guard

Standards
Standards
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.
Purpose
(Optional)
Copies the running configuration to the startup
configuration.
Title
—
Cisco Nexus 5000 Series NX-OS Security Configuration Guide, Release 5.0(3)N1(1)
Displaying IP Source Guard Bindings
5