Ipv6 Mld Snooping Vlan Mrouter - Cisco Sx350 Cli Manual

42
847
Default Configuration
MLDv1.
Command Mode
Global Configuration mode
Example
he following example sets the version of the MLD Snooping Querier VLAN 1 to 2:
switchxxxxxx(config)# ipv6 mld snooping vlan 1 querier version 2

42.7 ipv6 mld snooping vlan mrouter

To enable automatic learning of Multicast router ports, use the ipv6 mld snooping
vlan mrouter command in Global Configuration mode. To remove the configuration,
use the no form of this command.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
•
vlan-id
—Specifies the VLAN.
•
pim-dvmrp—Learn Multicast router port by PIM, DVMRP and MLD
messages.
Default Configuration
Learning pim-dvmrp is enabled.
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports can be configured statically with the
forward-all command.
You can execute the command before the VLAN is created.
vlan-id
mrouter learn pim-dvmrp
vlan-id
mrouter learn pim-dvmrp
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
MLD Snooping Commands
bridge multicast