Show Mac Address-Table Count - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

show mac address-table count

Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
Note Beginning with Cisco IOS Release 12.1(11)EA1, the show mac address-table count command replaces
the show mac-address-table count command (with the hyphen).
Syntax Description
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(4)EA1
12.1(11)EA1
Usage Guidelines
If no VLAN number is specified, the address count for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table count command:
Switch> show mac address-table count
Mac Entries for Vlan
---------------------------
Dynamic Address Count
Static
Total Mac Addresses
78-11195-09
show mac address-table count [vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Display the number of addresses for a specific VLAN. The range is 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The show mac-address-table count command was replaced by the show
mac address-table count command.
: 1
: 2
Address Count : 0
: 2
Catalyst 3550 Multilayer Switch Command Reference
show mac address-table count
2-311