Setting Global Green Ethernet Properties - Cisco 200 Series Administration Manual

Port Management
Green Ethernet
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide

Setting Global Green Ethernet Properties

The Properties Page displays and enables configuration of the Green Ethernet
mode for the switch. It also displays the current power savings.
To define Global Green Ethernet properties:
Click Port Management > Green Ethernet > Properties. The Properties Page
opens.
Enter the values for the following fields:
• Energy Detect Mode—Globally enable or disable Energy Detect mode. If
this mode is changed, a message is displayed.
The Energy mode is changed when you click OK.
• Short Reach Mode—Globally enable or disable Short Reach mode if there
are GE ports on the switch.
Disabling or enabling Energy Detect Mode temporarily disconnects
NOTE
the network connections.
• Power Savings—Displays the power saved by running in Green Ethernet
mode.
• Cumulative Energy Saved—Displays the amount of energy saved from the
last switch reboot. This value is updated each time there is an event that
affects power saving.
Click Apply. The Port Settings are modified, and the switch is updated.
8
89