Ip Domain-List - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip domain-list

To configure the IP domain list, use the ip domain-list command in configuration mode. To disable the
IP domain list, use the no form of the command.
Syntax Description
domain-name
Defaults None.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example configures the IP domain list.
switch# config terminal
switch(config)# ip domain MyList
Related Commands Command
show ip route
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ip domain-list domain-name
no ip domain-list domain-name
Specifies the domain name for the IP domain list. Maximum length is 80
characters.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Cisco MDS 9000 Family Command Reference
ip domain-list
11-49