Table of Contents
Advertisement
Doors
Door Outer Handle Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
Door panel Isee page
20-4)
Plastic cover, as necessary Isee page
20-2)
2.
Raise the glass fully.
3. Remove the lock rod protector IA).
-1 Remove the screw.
-2
Release the protector from the latch protector
IB).
-3 Pull the protector down to release the hook Ie)
from the door.
Fastener location
~:
Screw, 1
c
20-6
4. Disconnect the cylinder rod IA). and release the
retainer clip IB). then remove the lock cylinder Ie).
B
5. Disconnect the outer handle rod IA).
Fastener Locations
~:
Bolt, 2
6. Remove the maintenance cap IB). and remove the
bolts securing the outer handle Ie) while holding
the handle from outside. Release the hook (0), then
remove the outer handle protector IE).
•
Advertisement
Table of Contents
Troubleshooting
