AudioCodes Mediant 1000B User Manual page 547

User's Manual
Parameter
Matching Characteristics - Rule
Additional Manipulation
CLI: is-additional-manipulation
[IPOutboundManipulation_IsAddit
ionalManipulation]
Source IP Group ID
CLI: src-ip-group-id
[IPOutboundManipulation_SrcIPG
roupID]
Destination IP Group ID
CLI: dst-ip-group-id
[IPOutboundManipulation_DestIP
GroupID]
Source Username Prefix
CLI: src-user-name-prefix
[IPOutboundManipulation_SrcUse
rnamePrefix]
Source Host
CLI: src-host
[IPOutboundManipulation_SrcHos
t]
Destination Username Prefix
CLI: dst-user-name-prefix
[IPOutboundManipulation_DestUs
ernamePrefix]
Destination Host
CLI: dst-host
[IPOutboundManipulation_DestHo
st]
Calling Name Prefix
CLI: calling-name-prefix
[IPOutboundManipulation_Calling
NamePrefix]
Message Condition
CLI: message-condition
[IPOutboundManipulation_Messa
geCondition]
Version 6.8
Determines whether additional manipulation is done for the
table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.

[1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and perform
the manipulation specified by this rule.
Note: Additional manipulation can only be done on a different
item (source URI, destination URI, or calling name) to the rule
configured in the row above (configured by the 'Manipulated
URI' parameter).
Defines the IP Group from where the INVITE is received.
The default values is -1 (i.e., any IP Group).
Defines the IP Group to where the INVITE is to be sent.
The default value is -1 (i.e., any IP Group).
Defines the prefix of the source SIP URI user name, typically
used in the SIP From header.
The default value is the asterisk (*) symbol (i.e., any source
username prefix). The prefix can be a single digit or a range of
digits. For available notations, see ''Dialing Plan Notation for
Routing and Manipulation'' on page 713.
Defines the source SIP URI host name - full name, typically in
the From header.
The default value is the asterisk (*) symbol (i.e., any source
host name).
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination username prefix). The prefix can be a single digit
or a range of digits. For available notations, see ''Dialing Plan
Notation for Routing and Manipulation'' on page 713.
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination host name).
Defines the prefix of the calling name (caller ID). The calling
name appears in the SIP From header.
The valid value is a string of up to 37 characters. By default,
no prefix is defined.
Assigns a Message Condition rule as a matching
characteristic. Message Condition rules define required SIP
message formats. For configuring Message Condition rules,
see ''Configuring Message Condition Rules'' on page 528.
547
29. SBC Configuration
Description
Mediant 1000B Gateway & SBC