AudioCodes Mediant 1000B User Manual page 132


To configure an SRV rule:
1. Open the Internal SRV Table page (Configuration tab > VoIP menu > Network >
DNS > Internal SRV Table).
2. Click Add; the following dialog box appears:
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 12-19: Internal SRV Table Parameter Descriptions
Parameter
Domain Name
CLI: domain-name
[Srv2Ip_InternalDomain]
Transport Type
CLI: transport-type
[Srv2Ip_TransportType]
DNS Name (1-3)
CLI: dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
Priority (1-3)
CLI: priority-1|2|3
[Srv2Ip_Priority1/2/3]
Weight (1-3)
CLI: weight-1|2|3
[Srv2Ip_Weight1/2/3]
User's Manual
Figure 12-11: Internal SRV Table Page
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Defines the transport type.

[0] UDP (default)

[1] TCP

[2] TLS
Defines the first, second or third DNS A-Record to which the host
name is translated.
Defines the priority of the target host. A lower value means that it is
more preferred.
Defines a relative weight for records with the same priority.
132
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034