Services; Radius And Ldap Parameters; General Parameters; Radius Parameters - AudioCodes Mediant 1000B User Manual
Analog & digital voip media gateway enterprise session border controller gateway & e-sbc
Hide thumbs
Also See for Mediant 1000B:
- User manual (1281 pages) ,
- Hardware installation manual (92 pages) ,
- Configuration note (52 pages)
Table of Contents
Advertisement
User's Manual
51.14 Services
51.14.1 RADIUS and LDAP Parameters
51.14.1.1
General Parameters
The general RADIUS and LDAP parameters are described in the table below.
Parameter
Web: Use Local Users
Database
CLI: configure system >
mgmt-auth > use-local-
users-db
[MgmtLocalDatabaseBe
havior]
Web: Behavior upon
Authentication Server
Timeout
CLI: configure system >
mgmt-auth > timeout-
behavior
[MgmtBehaviorOnTimeo
ut]
Web: Default Access
Level
CLI: default-access-level
[DefaultAccessLevel]
51.14.1.2
RADIUS Parameters
The RADIUS parameters are described in the table below.
Parameter
RADIUS Accounting Parameters
Web: Enable RADIUS
Access Control
CLI: enable
[EnableRADIUS]
Version 6.8
General RADIUS and LDAP Parameters
Defines when the device uses its local user database (Web Users
table) for LDAP- or RADIUS-based management-user login
authentication.
[0] When No Auth Server Defined = (Default) When no
LDAP/RADIUS server is configured (or as fallback if the server is
inaccessible).
[1] Always = Always first verify the user's credentials in the Web
Users table, and if not found, then search the LDAP/RADIUS server.
Defines the device's response when a connection timeout occurs with
the LDAP/RADIUS server.
[0] Deny Access = User is denied access to the management
platform.
[1] Verify Access Locally = (Default) Device verifies the user's
credentials in its Web Users table (local database).
Note: The parameter is applicable to LDAP- or RADIUS-based
management-user login authentication.
Defines the default access level for the device when the LDAP/RADIUS
response doesn't include an access level attribute for determining the
user's management access level.
The valid range is 0 to 255. The default is 200 (i.e., Security
Administrator).
Note: The parameter is applicable to LDAP- or RADIUS-based
management-user login authentication and authorization.
RADIUS Parameters
Enables the RADIUS application.
[0] Disable (Default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
1003
51. Configuration Parameters Reference
Description
Description
Mediant 1000B Gateway & SBC
Advertisement
Chapters
Table of Contents
