Tls Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter
Transmitted RTP Packets
EMS: RTP EncryptionDisable
Tx
CLI: RTP-encryption-disable-tx
[RTPEncryptionDisableTx]
Web: Disable Encryption On
Transmitted RTCP Packets
EMS: RTCP EncryptionDisable
Tx
CLI: RTCP-encryption-disable-
tx
[RTCPEncryptionDisableTx]
CLI: srtp-state-behavior-mode
[ResetSRTPStateUponRekey]

51.4.4 TLS Parameters

The Transport Layer Security (TLS) parameters are described in the table below.
Parameter
Web: TLS Contexts Table
CLI: configure system > tls #
[TLSContexts]
Web: TLS Client Re-Handshake
Interval
EMS: TLS Re Handshake Interval
CLI: tls-re-hndshk-int
[TLSReHandshakeInterval]
Web: TLS Mutual Authentication
EMS: SIPS Require Client
Version 6.8
session.

[0] Enable (default)

[1] Disable
Enables encryption on transmitted RTCP packets in a secured
RTP session.

[0] Enable (default)

[1] Disable
Global parameter that enables synchronization of the SRTP state
between the device and a server when a new SRTP key is
generated upon a SIP session expire. You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_ResetSRTPStateUponRekey). For a detailed description
of this parameter and for configuring this functionality in the IP
Profile table, see ''Configuring IP Profiles'' on page 302.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Table 51-26: TLS Parameters
Defines SSL/TLS certificates.
The format of the ini file table parameter is as follows:
[ TLSContexts ]
FORMAT TLSContexts_Index = TLSContexts_Name,
TLSContexts_TLSVersion, TLSContexts_ServerCipherString,
TLSContexts_ClientCipherString, TLSContexts_OcspEnable,
TLSContexts_OcspServerPrimary,
TLSContexts_OcspServerSecondary,
TLSContexts_OcspServerPort,
TLSContexts_OcspDefaultResponse;
[ \TLSContexts ]
For a detailed description of this table, see Configuring TLS
Certificate Contexts on page 91.
Defines the time interval (in minutes) between TLS Re-
Handshakes initiated by the device.
The interval range is 0 to 1,500 minutes. The default is 0 (i.e.,
no TLS Re-Handshake).
Defines the device's mode of operation regarding mutual
authentication and certificate verification for TLS connections.
751
51. Configuration Parameters Reference
Description
Description
Mediant 1000B Gateway & SBC