User Information File For Sbc User Database - AudioCodes Mediant 1000B User Manual

User's Manual

PBXExtensionNum is the PBX extension number (up to 10 characters)

GlobalPhoneNum is the "global" phone number (up to 20 characters) for the IP side

DisplayName is the Caller ID (string of up to 30 characters) of the PBX extension

UserName is the username (string of up to 40 characters) for registering the user
when authentication is necessary

Password is the password (string of up to 20 characters) for registering the user when
authentication is necessary
Each line in the file represents a mapping rule of a single PBX extension user.
Notes:
•
Make sure that the last line in the User Info file ends with a carriage return (i.e., by
pressing the <Enter> key).
•
To modify the GW User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.
Below is an example of a configured User Info file:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
401 , 638001 , Mike , miked , 1234
402 , 638002 , Lee , leem, 4321
403 , 638003 , Sue , suer, 8790
404 , 638004 , John , johnd, 7694
405 , 638005 , Pam , pame, 3928
406 , 638006 , Steve , steveg, 1119
407 , 638007 , Fred , frede, 8142
408 , 638008 , Maggie , maggiea , 9807

36.1.6.3 User Information File for SBC User Database

You can use the SBC User Info table for the following:

Registering each user to an external registrar server.

Authenticating (for any SIP request and as a client) each user if challenged by an
external server.

Authenticating as a server incoming user requests (for SBC security).
If the device registers on behalf of users and the users do not perform registration, any SIP
request destined to the user is routed to the Proxy Set associated with the user's IP Group.
You can configure up to 1,000 users (table rows) in the SBC User Info table. The SBC
User Info table can be configured using any of the following methods:

Web interface - see ''Configuring SBC User Info Table in Web Interface'' on page

CLI - see Configuring SBC User Info Table in CLI on page

Loadable User Info file - see ''Configuring SBC User Info Table in Loadable Text File''
on page
Version 6.8
597
595 Mediant 1000B Gateway & SBC
36. Software Upgrade
597
596