AudioCodes Mediant 1000B User Manual page 603

User's Manual
•
On the toolbar, click Device Actions, and then choose Software Upgrade
Wizard.
5. Click Start Software Upgrade; the wizard starts, prompting you to load a .cmp file:
Note:
the device, by clicking Cancel
loading the cmp file, the upgrade process must be completed with a device reset.
6. Click Browse, and then navigate to where the .cmp file is located on your computer.
Select the file, and then click Open.
7. Click Load File; the device begins to install the .cmp file. A progress bar displays the
status of the loading process and a message informs you when file load successfully
completes.
Version 6.8
Figure 36-5: Start Software Upgrade Wizard Screen
Figure 36-6: Software Upgrade Wizard - Load CMP File
At this stage, you can quit the Software Upgrade Wizard without having to reset
. However, if you continue with the wizard and start
603 Mediant 1000B Gateway & SBC
36. Software Upgrade