AudioCodes Mediant 1000B User Manual page 593

User's Manual

To configure the GW User Info table in the Web interface:
1. Open the GW User Info Table page (Configuration tab > VoIP menu > SIP
Definitions > User Information > GW User Info Table).
2. Click Add: the following dialog box appears:
3. Configure the GW User Info table parameters according to the table below.
4. Click Submit.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 568.
To register a user, select the user's table entry, and then from the Action button's drop-
down list , choose Register. To un-register a user, select the user, and then from the
Action button's drop-down list , choose Un-Register.
Table 36-2: GW User Info Table Parameter Descriptions
Parameter
Index
[GWUserInfoTable_Index]
PBX Extension
[GWUserInfoTable_PBXExtension]
Global Phone Number
[GWUserInfoTable_GlobalPhoneNumber]
Display Name
[GWUserInfoTable_DisplayName]
Username
[GWUserInfoTable_Username]
Password
[GWUserInfoTable_Password]
Status
Version 6.8
Figure 36-2: GW User Info Table in Web Interface
Defines an index for the new table record.
Defines the PBX extension number.
The valid value is a string of up to 10 characters.
Defines the "global" phone number for the IP side.
The valid value is a string of up to 20 characters.
Defines the Caller ID of the PBX extension.
The valid value is a string of up to 30 characters.
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Defines the password for registering the user when
authentication is necessary.
The valid value is a string of up to 20 characters.
(Read-only field) Displays the status of the user -
"Registered" or "Not Registered".
Description
593 Mediant 1000B Gateway & SBC
36. Software Upgrade