Displaying Login Information Upon Login - AudioCodes Mediant 1000B User Manual

Parameter
Web: User Level
CLI: user-level
6.4

Displaying Login Information upon Login

The device can display login information immediately upon Web login.

To enable display of user login information upon a successful login:
1. Open the WEB Security Settings page (Configuration tab > System menu >
Management > WEB Security Settings).
2. From the 'Display Login Information' drop-down list, select Yes.
3. Click Submit.
Once enabled, the Login Information window is displayed upon a successful login, as
shown in the example below:
User's Manual
Defines the user's access level.

Monitor = (Default) Read-only user. This user can only view Web
pages and access to security-related pages is denied.

Administrator = Read/write privileges for all pages, except security-
related pages including the Web Users table where this user has
only read-only privileges.

Security Administrator = Read/write privileges for all pages. This
user is the Security Administrator.

Master = Read/write privileges for all pages. This user also functions
as a security administrator.
Notes:

At least one Security Administrator must exist. The last remaining
Security Administrator cannot be deleted.

The first Master user can be added only by a Security Administrator
user.

Additional Master users can be added, edited and deleted only by
Master users.

If only one Master user exists, it can be deleted only by itself.

Master users can add, edit, and delete Security Administrators (but
cannot delete the last Security Administrator).

Only Security Administrator and Master users can add, edit, and
delete Administrator and Monitor users.
Figure 6-19: Login Information Window
62
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034