AudioCodes Mediant 1000B User Manual page 206

Parameter
dex]
LDAP Server IP
CLI: server-ip
[LdapConfiguration_Ld
apConfServerIp]
LDAP Server Port
CLI: server-port
[LdapConfiguration_Ld
apConfServerPort]
LDAP Server Max
Respond Time
CLI: max-respond-time
[LdapConfiguration_Ld
apConfServerMaxResp
ondTime]
LDAP Server Domain
Name
CLI: domain-name
[LdapConfiguration_Ld
apConfServerDomainN
ame]
LDAP Password
CLI: password
[LdapConfiguration_Ld
apConfPassword]
User's Manual
Note: Each table row must be configured with a unique index.
Defines the IP address of the LDAP server (in dotted-decimal notation,
e.g., 192.10.1.255).
By default, no IP address is defined.
Note: If you want to use an FQDN for the LDAP server, leave this
parameter undefined and configure the FQDN in the 'LDAP Server
Domain Name' parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port number is 389.
Defines the duration (in msec) that the device waits for LDAP server
responses.
The valid value range is 0 to 86400. The default is 3000.
Note: If the response time expires, you can configure the device to use
its local database (Web Users table) for authenticating the user. For
more information, see 'Configuring Local Database for Management User
Authentication' on page 214.
Defines the domain name (FQDN) of the LDAP server. The device tries
to connect to the LDAP server according to the IP address listed in the
received DNS query. If there is no connection to the LDAP server or the
connection to the LDAP server fails, the device tries to connect to the
LDAP server with the next IP address in the DNS query list.
Note: The 'LDAP Server IP' parameter takes precedence over this
parameter. Thus, if you want to use an FQDN, leave the 'LDAP Server
IP' parameter undefined.
Defines the user password for accessing the LDAP server during
connection and binding operations.

LDAP-based SIP queries: The parameter is the password used by the
device to authenticate itself, as a client, to obtain LDAP service from
the LDAP server.

LDAP-based user login authentication: The parameter represents the
login password entered by the user during a login attempt. You can
use the $ (dollar) sign in this value to enable the device to
automatically replace the $ sign with the user's login password in the
search filter, which it sends to the LDAP server for authenticating the
user's username-password combination. For example, $.
Note: By default, the device sends the password in clear-text format. You
can enable the device to encrypt the password using TLS (see the 'Use
SSL' parameter below).
206
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034