AudioCodes Mediant 1000B User Manual page 215

User's Manual

To use the Web Users table for authenticating management users:
1. Open the Authentication Settings page (Configuration tab > System menu >
Management > Authentication Settings).
Figure 15-17: Authentication Settings Page - Local Database for Login Authentication
2. Under General Login Authentication Settings:
•
Configure when the Web Users table must be used to authenticate login users.
From the 'Use Local Users Database' drop-down list, select one of the following:
♦
♦
•
Configure whether the Web Users table must be used to authenticate login users
upon connection timeout with the server. From the 'Behavior upon Authentication
Server Timeout' drop-down list, select one of the following:
♦
♦
3. Click Submit.
Version 6.8
When No Auth Server Defined (default): When no LDAP/RADIUS server
is configured (or as fallback if the server is inaccessible).
Always: Always, but if not found, use the LDAP/RADIUS server to
authenticate the user.
Deny Access: User is denied access to the management platform.
Verify Access Locally (default): The device verifies the user's credentials
in the Web Users table.
215 Mediant 1000B Gateway & SBC
15. Services