User's Manual
27
Analog Gateway
This section describes configuration of analog settings.
Note:
module.
27.1
Configuring Keypad Features
The Keypad Features page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:
Call Forward
Caller ID Restriction
Hotline for automatic dialing
Call Transfer
Call Waiting
Rejection of Anonymous Calls
Notes:
•
The Keypad Features page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to the
method used during a regular call (i.e., max digits, interdigit timeout, digit map,
etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e., not
deactivated after a call).
•
For a description of the keypad parameters, see ''Telephone Keypad Sequence
Parameters'' on page 946.
Version 6.8
The Analog Gateway appears only if the device is installed with an FXS or FXO
457
Mediant 1000B Gateway & SBC
27. Analog Gateway