Configuration Parameters Reference; Management Parameters; General Parameters - AudioCodes Mediant 1000B User Manual

Analog & digital voip media gateway enterprise session border controller gateway & e-sbc
Hide thumbs Also See for Mediant 1000B:
Table of Contents

Advertisement

User's Manual
51

Configuration Parameters Reference

The device's configuration parameters, default values, and their descriptions are
documented in this section.
Note:
parameters and their enumeration values.
51.1

Management Parameters

This section describes the device's management-related parameters.

51.1.1 General Parameters

The general management parameters are described in the table below.
Parameter
WAN OAMP Interface
CLI: bind GigabitEthernet
<slot/port.vlanId> oamp
[OAMPWanInterfaceName]
Web: Allow WAN access to
HTTP
CLI: wan-http-allow
[AllowWanHTTP]
Web: Allow WAN access to
HTTPS
CLI: wan-https-allow
[AllowWanHTTPS]
Web: Allow WAN access to
SNMP
CLI: wan-snmp-allow
[AllowWanSNMP]
Web: Allow WAN access to
Telnet
CLI: wan-telnet-allow
[AllowWanTelnet
Web: Allow WAN access to
SSH
CLI: wan-ssh-allow
[AllowWanSSH]
Version 6.8
Parameters and values enclosed in square brackets [...] represent the ini file
Table 51-1: General Management Parameters
Binds the OAMP interface to a WAN interface, which can later be
associated with a Virtual Routing and Forwarding (VRF).
Enables WAN access to the management interface through HTTP.
[0] Disable (default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through HTTPS.
[0] Disable (default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through SNMP.
[0] Disable (default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through Telnet.
[0] Disable (default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through SSH.
[0] Disable (default)
[1] Enable
Note: For this parameter to take effect, a device reset is required.
51. Configuration Parameters Reference
Description
715
Mediant 1000B Gateway & SBC

Advertisement

Table of Contents
loading

Table of Contents