AudioCodes Mediant 1000B User Manual page 1007

User's Manual
Parameter
eName]
Web: MS LDAP MOBILE
Number attribute name
CLI: ldap-mobile-nm-attr
[MSLDAPMobileNumAttri
buteName]
CLI: ldap-private-nm-attr
[MSLDAPPrivateNumAttri
buteName]
Web: MS LDAP DISPLAY
Name Attribute Name
CLI: ldap-display-nm-attr
[MSLDAPDisplayNameAtt
ributeName]
CLI: ldap-primary-key
[MSLDAPPrimaryKey]
CLI: ldap-secondary-key
[MSLDAPSecondaryKey]
LDAP Cache Service
CLI: cache
[LDAPCacheEnable]
LDAP Cache Entry Timeout
CLI: entry-timeout
[LDAPCacheEntryTimeout
]
LDAP Cache Entry
Removal Timeout
CLI: entry-removal-
timemout
[LDAPCacheEntryRemova
lTimeout]
LDAP Configuration Table
Web: LDAP Configuration
Table
CLI: configure voip > ldap >
ldap-configuration
Version 6.8
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"mobile".
Defines the name of the attribute that represents the user's private
number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter, then
the device queries the AD for the destination number in this private
attribute name; otherwise, this parameter is not used as a search
key.
The default is "msRTCSIP-PrivateLine".
Defines the attribute name that represents the Calling Name in the
AD for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default is
"displayName".
Defines the name of the attribute used as a query search key for the
destination number in the AD. This is used instead of the "PBX"
attribute name (configured by the MSLDAPPBXNumAttributeName
parameter).
The default is not configured.
Defines the name of the attribute used as the second query search
key for the destination number in the AD, if the primary search key
or PBX search is not found.
Enables the LDAP cache service.

[0] Disable (default)

[1] Enable
Notes:

For this parameter to take effect, a device reset is required.

For more information on LDAP caching, see 'Configuring the
Device's LDAP Cache' on page 212.
Defines the duration (in minutes) that an entry in the LDAP cache is
valid. If the timeout expires, the cached entry is only used if there is
no connectivity with the LDAP server.
The default is 1200.
Defines the duration (in hours) after which the LDAP entry is
removed from the cache.
The default is 0.
Defines the LDAP servers.
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index =
LdapConfiguration_LdapConfServerIp,
1007
51. Configuration Parameters Reference
Description
Mediant 1000B Gateway & SBC