Configuring Dtmf And Dialing - AudioCodes Mediant 1000B User Manual

User's Manual
25

Configuring DTMF and Dialing

The DTMF & Dialing page is used to configure parameters associated with dual-tone multi-
frequency (DTMF) and dialing. For a description of the parameters appearing on this page,
see ''Configuration Parameters Reference'' on page 715.

To configure the DTMF and dialing parameters:
1. Open the DTMF & Dialing page (Configuration tab > VoIP menu > GW and IP to IP
> DTMF & Supplementary > DTMF & Dialing).
2. Configure the parameters as required.
3. Click Submit.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 568.
Version 6.8
25. Configuring DTMF and Dialing
407 Mediant 1000B Gateway & SBC