AudioCodes Mediant 1000B User Manual page 364

Parameter
Web: Suffix to Add
EMS: Prefix/Suffix To Add
CLI: suffix-to-add
[Suffix2Add]
Web/EMS: Number of
Digits to Leave
CLI: num-of-digits-to-leave
[LeaveFromRight]
Web: NPI
EMS: Number Plan
CLI: npi
[NumberPlan]
Web: TON
EMS: Number Type
CLI: ton
[NumberType]
Web: Presentation
EMS: Is Presentation
Restricted
CLI: is-presentation-
restricted
[IsPresentationRestricted]
User's Manual
Defines the number or string that you want added to the end of the
telephone number. For example, if you enter 00 and the phone number
is 1234, the new number is 123400.
Defines the number of digits that you want to keep from the right of the
phone number. For example, if you enter 4 and the phone number is
00165751234, then the new number is 1234.
Defines the Numbering Plan Indicator (NPI).

[0] Unknown (default)

[9] Private

[1] E.164 Public

[-1] Not Configured = value received from PSTN/IP is used
Notes:

This parameter is applicable only to number manipulation tables for
IP-to-Tel calls.

NPI can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 382.
Defines the Type of Number (TON).

If you selected 'Unknown' for the NPI, you can select Unknown [0].

If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].

If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4] or Abbreviated [6].
The default is 'Unknown'.
Notes:

This parameter is applicable only to number manipulation tables for
IP-to-Tel calls.

TON can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 382.
Enables caller ID.

Not Configured = Privacy is determined according to the Caller ID
table (see Configuring Caller Display Information on page 463).

[0] Allowed = Sends Caller ID information when a call is made using
these destination/source prefixes.

[1] Restricted = Restricts Caller ID information for these prefixes.
Notes:

This field is applicable only to number manipulation tables for source
phone number manipulation.

If this field is set to Restricted and the 'Asserted Identity Mode'
(AssertedIdMode) parameter is set to Add P-Asserted-Identity, the
From header in the INVITE message includes the following: From:
'anonymous' <sip: anonymous@anonymous.invalid> and 'privacy:
id' header.
364
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034