User's Manual
6.5
Configuring Web Security Settings
The WEB Security Settings page is used to configure security for the device's Web
interface.
By default, the device accepts HTTP and HTTPS access. However, you can enforce
secure Web access communication method by configuring the device to accept only
HTTPS.
For a description of these parameters, see ''Web and Telnet Parameters'' on page 715.
To define Web access security:
1.
Open the WEB Security Settings page (Configuration tab > System menu >
Management > WEB Security Settings).
2.
Set the 'Secured Web Connection (HTTPS)' parameter to HTTPS Only.
3.
Configure the parameters as required.
4.
Click Submit.
5.
To save the changes to flash memory, see ''Saving Configuration'' on page 568.
Version 6.8
63
Mediant 1000B Gateway & SBC
6. Web-Based Management