Configuring Analog Settings - AudioCodes Mediant 1000B User Manual

14.6

Configuring Analog Settings

The Analog Settings page allows you to configure various analog parameters. For a
detailed description of the parameters appearing on this page, see ''Configuration
Parameters Reference'' on page 715.
This page also selects the type (USA or Europe) of FXS and/or FXO coefficient
information. The FXS coefficient contains the analog telephony interface characteristics
such as DC and AC impedance, feeding current, and ringing voltage.

To configure the analog parameters:
1. Open the Analog Settings page (Configuration tab > VoIP menu > Media > Analog
Settings).
2. Configure the parameters as required.
3. Click Submit.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 568.
User's Manual
Figure 14-11: Analog Settings Page
182
Mediant 1000B Gateway & SBC
Document #: LTRT-27034