AudioCodes Mediant 1000B User Manual page 304

4. Click Submit, and then save ("burn") your settings to flash memory.
Table 19-5: IP Profile Settings Table Parameter Descriptions
Parameter
Common
Web: Index
[IpProfile_Index]
Web: Profile Name
CLI: profile-name
[IpProfile_ProfileName]
Web: Profile Preference
CLI: ip-preference
[IpProfile_IpPreference]
Web: Dynamic Jitter Buffer
Minimum Delay
CLI: jitter-buffer-minimum-delay
[IpProfile_JitterBufMinDelay]
Web: Dynamic Jitter Buffer
Optimization Factor
CLI: jitter-buffer-optimization-
factor
[IpProfile_JitterBufOptFactor]
Web: RTP IP DiffServ
CLI: rtp-ip-diffserv
[IpProfile_IPDiffServ]
Web: Signaling DiffServ
CLI: signaling-diffserv
[IpProfile_SigIPDiffServ]
Web: Silence Suppression
CLI: sce
[IpProfile_SCE]
User's Manual
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the IP Profile.
The valid value is a string of up to 20 characters.
Defines the priority of the IP Profile, where 20 is the highest priority
and 1 the lowest priority.
Notes:

If both an IP Profile and a Tel Profile apply to the same call, the
coders and other common parameters of the profile with the
highest preference are applied to the call. If the preference of
the profiles is identical, the Tel Profile parameters are applied.

If the coder lists of both an IP Profile and a Tel Profile apply to
the same call, only the coders common to both are used. The
order of the coders is determined by the preference.

This parameter is applicable only to the Gateway application.
Defines the minimum delay (in msec) of the device's dynamic Jitter
Buffer.
The valid range is 0 to 150. The default delay is 10.
Notes:

For more information on the Jitter Buffer, see Dynamic Jitter
Buffer Operation on page 170.

The corresponding global parameter is DJBufMinDelay.
Defines the Dynamic Jitter Buffer frame error/delay optimization
factor.
The valid range is 0 to 12. The default factor is 10.
Notes:

For data (fax and modem) calls, set this parameter to 12.

For more information on Jitter Buffer, see Dynamic Jitter Buffer
Operation on page 170.

The corresponding global parameter is DJBufOptFactor.
Defines the DiffServ value for Premium Media class of service
(CoS) content.
The valid range is 0 to 63. The default is 46.
Note: The corresponding global parameter is
PremiumServiceClassMediaDiffServ.
Defines the DiffServ value for Premium Control CoS content (Call
Control applications).
The valid range is 0 to 63. The default is 40.
Note: The corresponding global parameter is
PremiumServiceClassControlDiffServ.
Enables the Silence Suppression feature. When enabled, the
device, upon detection of silence period during a call does not send
packets, thereby conserving bandwidth during the VoIP call.
304
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034