AudioCodes Mediant 1000B User Manual page 265

User's Manual
Parameter
SIP Group Name
CLI: sip-group-name
[IPGroup_SIPGroupName]
Contact User
CLI: contact-user
[IPGroup_ContactUser]
SRD
CLI: srd
[IPGroup_SRD]
Media Realm Name
CLI: media-realm-name
[IPGroup_MediaRealm]
IP Profile ID
CLI: ip-profile-id
[IPGroup_ProfileId]
Local Host Name
CLI: local-host-name
[IPGroup_ContactName]
Version 6.8

To configure Proxy Sets, see ''Configuring Proxy Sets'' on page
272.
Defines the SIP Request-URI host name used in INVITE and
REGISTER messages sent to this IP Group, or the host name in the
From header of INVITE messages received from this IP Group.
The valid value is a string of up to 100 characters. The default is an
empty field.
Notes:

If this parameter is not configured, the value of the global
parameter, ProxyName is used instead (see ''Configuring Proxy
and Registration Parameters'' on page 283).

If the IP Group is of User type, this parameter is used internally
as a host name in the Request-URI for Tel-to-IP initiated calls.
For example, if an incoming call from the device's T1 trunk is
routed to a User-type IP Group, the device first creates the
Request-URI (<destination_number>@<SIP Group Name>), and
then it searches the internal database for a match.
Defines the user part of the From, To, and Contact headers of SIP
REGISTER messages, and the user part of the Contact header of
INVITE messages received from this IP Group and forwarded by the
device to another IP Group.
Notes:

This parameter is applicable only to Server-type IP Groups.

This parameter is overridden by the 'Contact User' parameter in
the 'Account' table (see ''Configuring Registration Accounts'' on
page 279).
Assigns an SRD to the IP Group.
The default is 0.
Notes:

For this parameter to take effect, a device reset is required.

To configure SRDs, see Configuring SRDs on page 256.

For Server-type IP Groups, if you assign the IP Group with a
Proxy Set ID (in the 'Proxy Set ID' field), the SRD field is
automatically set to the SRD value assigned to the Proxy Set in
the Proxy Set table.
Assigns a Media Realm to the IP Group. The string value must be
identical (including case-sensitive) to the Media Realm name defined
in the Media Realm table (see Configuring Media Realms on page
251).
Notes:

For this parameter to take effect, a device reset is required.

If the Media Realm is deleted from the Media Realm table, this
value becomes invalid.
Assigns an IP Profile to the IP Group. To configure IP Profiles, see
''Configuring IP Profiles'' on page 302.
The default is 0.
Defines the host name (string) that the device uses in the SIP
message's Via and Contact headers. This is typically used to define
an FQDN as the host name. The device uses this string for Via and
265
17. Control Network
Description
Mediant 1000B Gateway & SBC