AudioCodes Mediant 1000B User Manual page 238


Example 3: This example configures the device to route the incoming call according
to whether or not the source number of the incoming call also exists in the AD server.
The device queries the AD server for the attribute record, "telephoneNumber" whose
value is the same as the received source number (e.g., telephoneNumber=4064"). If
such an attribute is found, the device sends the call to the Lync server; if the query
fails, the device sends the call to the PBX.
•
Call Setup Rules table configuration:
♦
♦
♦
♦
♦
♦
♦
♦
If the attribute record is found (i.e., condition is not met), the rule ends with a
default exit result of true and uses the first routing rule (Lync). If the attribute
record does not exist (i.e., condition is met), the rule exits with a false result and
uses the second routing rule (PBX).
•
Routing table configuration: Two routing rules are assigned with the same
matching characteristics. Only the main routing rule is assigned a Call Setup
Rules Set ID.
♦
♦
User's Manual
'Rules Set ID': 3
'Attributes to Query': 'telephoneNumber=' + param.call.src.user
'Attributes to Get': telephoneNumber
'Row Role': Use Current Condition
'Condition': ldap.found !exists
'Action Subject': -
'Action Type': Exit
'Action Value': false
Index 1:

'Call Setup Rules Set Id': 3

'Destination IP Group ID': 3 (IP Group for Lync)
Index 2:

'Destination IP Group ID': 4 (IP Group of PBX)
Mediant 1000B Gateway & SBC
238 Document #: LTRT-27034