AudioCodes Mediant 1000B User Manual page 727

User's Manual
Parameter
[ResetNow]
Software/Configuration File URL Path for Automatic Update Parameters
CLI: firmware
[CmpFileURL]
CLI: voice-configuration
[IniFileURL]
CLI: prerecorded-tones
[PrtFileURL]
CLI:call-progress-tones
[CptFileURL]
CLI: voice-prompts
[VpFileURL]
Version 6.8
Invokes an immediate device reset. This option can be used to
activate offline (i.e., not on-the-fly) parameters that are loaded using
the parameter IniFileUrl.

[0] = (Default) The immediate restart mechanism is disabled.

[1] = The device immediately resets after an ini file with this
parameter set to 1 is loaded.
Note: If you use this parameter in an ini file for periodic automatic
provisioning with non-HTTP (e.g., TFTP) and without CRC, the
device resets after every file download.
Defines the name of the cmp file and the path to the server (IP
address or FQDN) from where the device can load the cmp file and
update itself. The cmp file can be loaded using HTTP/HTTPS.
For example: http://192.168.0.1/filename
Notes:

For this parameter to take effect, a device reset is required.

When this parameter is configured, the device always loads the
cmp file after it is reset.

The cmp file is validated before it's burned to flash. The
checksum of the cmp file is also compared to the previously
burnt checksum to avoid unnecessary resets.

The maximum length of the URL address is 255 characters.
Defines the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Notes:

For this parameter to take effect, a device reset is required.

When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.

The optional string <MAC> is replaced with the device's MAC
address. Therefore, the device requests an ini file name that
contains its MAC address. This option allows the loading of
specific configurations for specific devices.

The maximum length of the URL address is 99 characters.
Defines the name of the Prerecorded Tones (PRT) file and the path
to the server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the Voice Prompts file and the path to the
server (IP address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file
727
51. Configuration Parameters Reference
Description
Mediant 1000B Gateway & SBC