Automatic Update Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter
Web: Dial Plan File
EMS: Dial Plan File Name
[DialPlanFileName]
[UserInfoFileName]

51.1.8 Automatic Update Parameters

The automatic update of software and configuration files parameters are described in the
table below.
Table 51-8: Automatic Update of Software and Configuration Files Parameters
Parameter
General Automatic Update Parameters
CLI: configure
system/automatic-
update/update-firmware
[AutoUpdateCmpFile]
CLI: configure system >
automatic-update > update-
frequency
[AutoUpdateFrequency]
CLI: configure system >
automatic-update >
predefined-time
[AutoUpdatePredefinedTime]
CLI: automatic-update > http-
user-agent
[AupdHttpUserAgent]
CLI: automatic-update > auto-
firmware
[AutoCmpFileUrl]
Version 6.8
Defines the name (and path) of the Dial Plan file. This file should be
created using AudioCodes DConvert utility (refer to DConvert Utility
User's Guide).
Defines the name (and path) of the file containing the User
Information data.
Enables the Automatic Update mechanism for the cmp file.

[0] = (Default) The Automatic Update mechanism doesn't apply
to the cmp file.

[1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
Defines the number of minutes that the device waits between
automatic updates. The default is 0 (i.e., the update at fixed intervals
mechanism is disabled).
Note: For this parameter to take effect, a device reset is required.
Defines schedules (time of day) for automatic updates.
The format syntax of this parameter is 'hh:mm', where hh denotes
the hour and mm the minutes. The value must be enclosed in single
apostrophes. For example, '20:18'.
Notes:

For this parameter to take effect, a device reset is required.

The actual update time is randomized by five minutes to reduce
the load on the Web servers.
Defines the User-Agent HTTP header in the HTTP Get requests
sent by the device to the provisioning server for the Automatic
Update mechanism.
The valid value is a string of up to 511 characters. By default, this
parameter is not defined. In other words, the User-Agent header is
set to "Mozilla/4.0 (compatible; AudioCodes; <NAME>;<VER>)",
where the tags are replaced with actual values.
Notes:

The variable tags are case-sensitive.

The tags can be defined in any order.

The tags must be defined adjacent to one another (i.e., no
spaces or special characters).
Defines the filename and path (URL) to the provisioning server from
where the software file (.cmp) can be downloaded, based on
timestamp for the Automatic Updated mechanism.
725
51. Configuration Parameters Reference
Description
Description
Mediant 1000B Gateway & SBC