Viewing Test Call Statistics - AudioCodes Mediant 1000B User Manual

49.3

Viewing Test Call Statistics

In addition to viewing a brief status description of the test call in the 'Test Status' field (as
described in ''Starting, Stopping and Restarting Test Calls'' on page 703), you can also
view a more detailed status description which includes test call statistics.

To view statistics of a test call:
1. Open the Test Call Table page (Configuration tab > System menu > Test Call >
Test Call Table).
2. Select the test call table entry whose call statistics you want to view.
3. Click the Show/Hide button; the call statistics are displayed in the Test Statistics
pane located below the table, as shown below:
The 'Test Statistics' pane displays the following test session information:

Elapsed Time: Duration of the test call since it was started (or restarted).

Active Calls: Number of currently established test calls.

Call Attempts: Number of calls that were attempted.

Total Established Calls: Total number of calls that were successfully established.

Total Failed Attempts: Total number of call attempts that failed.

Remote Disconnections Count: Number of calls that were disconnected by the
remote side.

Average CPS: Average calls per second.

Test Status: Displays the status (brief description) as displayed in the 'Test Status'
field (see ''Starting, Stopping and Restarting Test Calls'' on page 703).

Average CPS: Average calls per second.

Detailed Status: Displays a detailed description of the test call status:
•
"Idle": test call is currently not active.
•
"Scheduled - Established Calls: <number of established calls>, ASR: <%>": test
call is planned to run (according to 'Schedule Interval' parameter settings) and
also shows the following summary of completed test calls:
♦
♦
•
"Running (Calls: <number of active calls>, ASR: <%>)": test call has been started
(i.e., the Dial command was clicked) and shows the following:
♦
♦
User's Manual
Figure 49-2: Viewing Test Call Statistics
Total number of test calls that were established.
Number of successfully answered calls out of the total number of calls
attempted (ASR).
Number of currently active test calls.
Number of successfully answered calls out of the total number of calls
attempted (Answer Seizure Ratio or ASR).
Mediant 1000B Gateway & SBC
704 Document #: LTRT-27034