AudioCodes Mediant 1000B User Manual page 303

User's Manual
The device selects the IP Profile as follows:

If you assign different IP Profiles (not default) to the same specific calls in all of the
above-mentioned tables, the device uses the IP Profile that has the highest preference
level (as set in the 'Profile Preference' parameter). If these IP Profiles have the same
preference level, the device uses the IP Profile that you assigned in the IP Group
table.

If you assign different IP Profiles to all of the above-mentioned tables and one table is
set to the default IP Profile, the device uses the IP Profile that is not the default.
Many of the parameters in the IP Profile table have a corresponding "global" parameter.
For calls that are not associated with any IP Profile, the settings of the "global" parameters
are applied.
Note:
AlwaysUseRouteTable parameter is set to 1).
The following procedure describes how to configure IP Profiles in the Web interface. You
can also configure IP Profiles using the table ini file parameter, IPProfile or the CLI
command, configure voip > coders-and-profiles ip-profile.

To configure an IP Profile:
1. Open the IP Profile Settings page (Configuration tab > VoIP menu > Coders and
Profiles > IP Profile Settings).
2. Click Add; the following dialog box appears:
3. Configure an IP Profile according to the parameters described in the table below.
Version 6.8
IP Profiles can also be implemented when using a Proxy server (when the
303 Mediant 1000B Gateway & SBC
19. Coders and Profiles