AudioCodes Mediant 1000B User Manual page 60

2. Click Add; the following dialog box is displayed:
Figure 6-18: Web Users Table - Add Record Dialog Box
3. Configure a Web user according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Parameter
Index
Web: Username
CLI: user-name
Web: Password
CLI: password
User's Manual
Table 6-11: Web User Table Parameter Descriptions
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Defines the Web user's username.
The valid value is a string of up to 40 alphanumeric characters,
including the period ".", underscore "_", and hyphen "-" signs.
Defines the Web user's password.
The valid value is a string of 8 to 40 ASCII characters, which must
adhere to the following guidelines:

Include at least eight characters.

Include at least two letters that are upper case (e.g., A).

Include at least two letters that are lower case (e.g., a).

Include at least two numbers (e.g., 4).

Include at least two symbols (non-alphanumeric characters) (e.g., $,
#, %).

Must contain no spaces.

Include at least four new characters that were not used in the
previous password.
Mediant 1000B Gateway & SBC
Description
60 Document #: LTRT-27034