Parameter
CLI: cas-table
[CasFileURL]
CLI: tls-root-cert
[TLSRootFileUrl]
CLI: tls-cert
[TLSCertFileUrl]
CLI: tls-private-key
[TLSPkeyFileUrl]
[UserInfoFileURL]
51.2
Networking Parameters
This subsection describes the device's networking parameters.
51.2.1 Ethernet Parameters
The Ethernet parameters are described in the table below.
Parameter
Physical Ports Settings Table
Web: Physical Ports
Settings
CLI: configure
voip/physical-port
[PhysicalPortsTable]
Ethernet Group Settings Table
Web: Ethernet Group
User's Manual
Note: The maximum length of the URL address is 99 characters.
Defines the name of the CAS file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
Defines the name of the TLS trusted root certificate file and the URL
from where it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
Defines the name of the TLS certificate file and the URL from where
it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
Defines the URL for downloading a TLS private key file using the
Automatic Update facility.
Defines the name of the User Information file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.
Table 51-9: Ethernet Parameters
This table parameter configures the physical Ethernet ports
The format of this parameter is as follows:
[ PhysicalPortsTable ]
FORMAT PhysicalPortsTable_Index = PhysicalPortsTable_Port,
PhysicalPortsTable_Mode, PhysicalPortsTable_NativeVlan,
PhysicalPortsTable_SpeedDuplex, PhysicalPortsTable_PortDescription,
PhysicalPortsTable_GroupMember, PhysicalPortsTable_GroupStatus;
[ \PhysicalPortsTable ]
For example:
PhysicalPortsTable 0 = GE_4_1, 1, 1, 4, "User Port #0", GROUP_1,
Active;
PhysicalPortsTable 1 = GE_4_2, 1, 1, 4, "User Port #1", GROUP_1,
Redundant;
Note: For a description of this parameter, see Configuring Physical
Ethernet Ports on page 109.
Defines the transmit (Tx) and receive (Rx) settings for the Ethernet port
728
Mediant 1000B Gateway & SBC
Description
Description
Document #: LTRT-27034