AudioCodes Mediant 1000B User Manual page 969

User's Manual
Parameter
CLI: trkgrpid-pref2source
[AddTrunkGroupAsPrefixTo
Source]
Web: Replace Empty
Destination with B-channel
Phone Number
EMS: Replace Empty Dst With
Port Number
CLI: empty-dst-w-bch-nb
[ReplaceEmptyDstWithPortNu
mber]
[CopyDestOnEmptySource]
Web: Add NPI and TON to
Calling Number
EMS: Add NPI And TON As
Prefix To Calling Number
CLI: npi-n-ton-to-cng-nb
[AddNPIandTON2CallingNum
ber]
Web: Add NPI and TON to
Called Number
EMS: Add NPI And TON As
Prefix To Called Number
CLI: npi-n-ton-to-cld-nb
[AddNPIandTON2CalledNumb
er]
Web: Add NPI and TON to
Redirect Number
CLI: np-n-ton-2-redirnb
[AddNPIandTON2RedirectNu
mber]
Web: IP to Tel Remove
Routing Table Prefix
EMS: Remove Prefix
CLI: ip2tel-rmv-rte-tbl
[RemovePrefix]
Version 6.8
source number).

[0] No (default)

[1] Yes
Determines whether the internal channel number is used as the
destination number if the called number is missing.

[0] No (default)

[1] Yes
Note: This parameter is applicable only to Tel-to-IP calls and if the
called number is missing.
Determines whether the destination number is copied to the source
number if no source number is present, for Tel-to-IP calls.

[0] = (Default) Source Number is left empty.

[1] = If the Source Number of a Tel-to-IP call is empty, the
Destination Number is copied to the Source Number.
Determines whether the Numbering Plan Indicator (NPI) and Type of
Numbering (TON) are added to the Calling Number for Tel-to-IP
calls.

[0] No = (Default) Do not change the Calling Number.

[1] Yes = Add NPI and TON to the Calling Number ISDN Tel-to-IP
call.
For example: After receiving a Calling Number of 555, NPI of 1, and
TON of 3, the modified number becomes 13555. This number can
later be used for manipulation and routing.
Determines whether NPI and TON are added to the Called Number
for Tel-to-IP calls.

[0] No = (Default) Do not change the Called Number.

[1] Yes = Add NPI and TON to the Called Number of ISDN Tel-to-
IP call.
For example: After receiving a Called Number of 555, NPI of 1 and
TON of 3, the modified number becomes 13555. This number can
later be used for manipulation and routing.
Determines whether the NPI and TON values are added as the prefix
to the Redirect number in INVITE messages' Diversion or History-
Info headers, for ISDN Tel-to-IP calls.

[0] Yes (Default)

[1] No
Determines whether or not the device removes the prefix (as
configured in the Inbound IP Routing table - see ''Configuring
Inbound IP Routing Table'' on page 392) from the destination
number for IP-to-Tel calls, before sending it to the Tel.

[0] No (default)

[1] Yes
For example: To route an incoming IP-to-Tel call with destination
number "21100", the Inbound IP Routing table is scanned for a
matching prefix. If such a prefix is found (e.g., "21"), then before the
call is routed to the corresponding Trunk Group, the prefix "21" is
removed from the original number, and therefore, only "100"
969
51. Configuration Parameters Reference
Description
Mediant 1000B Gateway & SBC