AudioCodes Mediant 1000B User Manual page 274

Parameter
Web: Proxy Set ID
EMS: Index
CLI: configure voip > voip-
network proxy-set
[ProxySet_Index]
Proxy Address
CLI: voip-network proxy-ip >
proxy-address
[ProxyIp_IpAddress]
Transport Type
CLI: voip-network proxy-ip >
transport-type
[ProxyIp_TransportType]
Proxy Name
CLI: proxy-name
[ProxySet_ProxyName]
DNS Resolve Method
CLI: dns-resolve-method
[ProxySet_DNSResolveMethod
]
User's Manual
Table 17-6: Proxy Sets Table Parameter Description
Defines an index number for the new table record.
Defines the address of the Proxy server. Up to 10 addresses can
be configured per Proxy Set.
The address can be defined as an IP address in dotted-decimal
notation (e.g., 201.10.8.1) or FQDN. You can also specify the port
in the following format:

IPv4 address: <IP address>:<port> (e.g., 201.10.8.1:5060)

IPv6 address: <[IPV6 address]>:<port> (e.g.,
[2000::1:200:200:86:14]:5060)
Defines the transport type for communicating with the Proxy
server.

[0] UDP

[1] TCP

[2] TLS

[-1] = Undefined
Note: If this parameter is not defined, the setting of the global
parameter SIPTransportType is used.
Defines an arbitrary name to easily identify the Proxy Set.
The valid value is a string of up to 20 characters.
Defines the DNS query record type for resolving the Proxy
server's host name into an IP address.

[-1] = DNS resolving is done according to the settings of the
global parameter, Proxy DNS Query Type.

[0] A-Record = (Default) A-record DNS query.

[1] SRV = If the Proxy address is configured with a domain
name without a port (e.g., domain.com), an SRV query is
done. The SRV query returns the host names (and their
weights). The device then performs DNS A-record queries per
host name (according to the received weights). If the
configured Proxy address contains a domain name with a port
(e.g., domain.com:5080), the device performs a regular DNS
A-record query.

[2] NAPTR = NAPTR query is done. If successful, an SRV
query is sent according to the information received in the
NAPTR response. If the NAPTR query fails, an SRV query is
done according to the configured transport type. If the
configured Proxy address contains a domain name with a port
(e.g., domain.com:5080), the device performs a regular DNS
A-record query. If the transport type is configured for the Proxy
address, a NAPTR query is not performed.
Note: An SRV query can return up to four host names. For each
host name, the subsequent DNS A-record query can be resolved
into up to 15 IP addresses. However, the device supports up to
30 DNS-resolved IP addresses. If the device receives more than
this number of DNS-resolved IP addresses, the device uses the
Mediant 1000B Gateway & SBC
Description
274 Document #: LTRT-27034