AudioCodes Mediant 1000B User Manual page 290

Table 18-2: Message Manipulations Parameter Descriptions
Parameter
Index
[MessageManipulations_Index]
Manipulation Name
CLI: manipulation-name
[MessageManipulations_Manipulati
onName]
Manipulation Set ID
CLI: manipulation-set-id
[MessageManipulations_ManSetID]
Matching Characteristics
Message Type
CLI: message-type
[MessageManipulations_MessageT
ype]
Condition
CLI: condition
[MessageManipulations_Condition]
Operation
Action Subject
CLI: action-subject
[MessageManipulations_ActionSubj
ect]
Action Type
CLI: action-type
[MessageManipulations_ActionTyp
e]
User's Manual
Defines an index number for the new table record.
Note: Each rule must be configured with a unique index.
Defines an arbitrary name to easily identify the Message
Manipulation rule.
The valid value is a string of up to 16 characters.
Defines a Manipulation Set ID for the rule. You can define
the same Manipulation Set ID for multiple rules to create a
group of rules. The Manipulation Set ID is used to assign the
manipulation rules to an IP Group (in the IP Group table) for
inbound and/or outbound messages.
The valid value is 0 to 19. The default is 0.
Defines the SIP message type that you want to manipulate.
The valid value is a string (case-insensitive) denoting the SIP
message.
For example:

Empty = rule applies to all messages

Invite = rule applies to all INVITE requests and responses

Invite.Request = rule applies to INVITE requests

Invite.Response = rule applies to INVITE responses

subscribe.response.2xx = rule applies to SUBSCRIBE
confirmation responses
Note: Currently, SIP 100 Trying messages cannot be
manipulated.
Defines the condition that must exist for the rule to apply.
The valid value is a string (case-insensitive).
For example:

header.from.url.user== '100' (indicates that the user part
of the From header must have the value "100")

header.contact.param.expires > '3600'

header.to.url.host contains 'domain'

param.call.dst.user != '100'
Defines the SIP header upon which the manipulation is
performed.
The valid value is a string (case-insensitive).
Defines the type of manipulation.

[0] Add (default) = Adds new header/param/body (header
or parameter elements).

[1] Remove = Removes header/param/body (header or
parameter elements).

[2] Modify = Sets element to the new value (all element
types).

[3] Add Prefix = Adds value at the beginning of the string
290
Mediant 1000B Gateway & SBC
Description
Document #: LTRT-27034