Trunk Groups And Routing Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter
[EnablePulseDialDetection]
[EnablePulseDialGeneration]
[PulseDialGenerationBreakTime]
[PulseDialGenerationMakeTime]
[PulseDialGenerationInterDigitTime] Defines the inter-digit duration (time between consecutively
51.10.12

Trunk Groups and Routing Parameters

The routing parameters are described in the table below.
Parameter
Trunk Group Table
Web: Trunk Group Table
EMS: SIP Endpoints > Phones
CLI: configure voip > gw hunt-or-trunk-
group TrunkGroup
[TrunkGroup]
Version 6.8
Enables the device to detect pulse (rotary) dialing from
analog equipment (e.g., telephones) connected to the
device's FXS port interfaces.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is
required.
Enables pulse dialing generation to the analog side when
dialing is received from the FXO side.

[0] Disable = (Default) Device generates DTMF signals.

[1] Enable = Generates pulse dialing.
Note: For this parameter to take effect, a device reset is
required.
Defines the duration of the Break connection (off-hook) for
FXO pulse dial generation.
The valid value range is 20 to 120 (in msec). The default is
60.
Note: For this parameter to take effect, a device reset is
required
Defines the duration of the Make connection (on-hook) for
FXO pulse dial generation.
The valid value range is 20 to 120 (in msec). The default is
40.
Note: For this parameter to take effect, a device reset is
required.
dialed digits) for FXO pulse dial generation.
The valid value range is 300 to 1500 (in msec). The default
is 700.
Note: For this parameter to take effect, a device reset is
required.
Table 51-66: Routing Parameters
This table parameter configures and activates the device's
endpoints/Trunk channels. This is done by defining
telephone numbers and assigning them to Trunk Groups.
The format of the ini file table parameter is as follows:
[TrunkGroup]
FORMAT TrunkGroup_Index =
TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId,
953
51. Configuration Parameters Reference
Description
Description
Mediant 1000B Gateway & SBC