Configuring The Internal Srv Table - AudioCodes Mediant 1000B User Manual

User's Manual
Parameter
Domain Name
CLI: domain-name
[Dns2Ip_DomainName]
First IP Address
CLI: first-ip-address
[Dns2Ip_FirstIpAddress]
Second IP Address
CLI: second-ip-address
[Dns2Ip_SecondIpAddress]
Third IP Address
CLI: third-ip-address
[Dns2Ip_ThirdIpAddress]
Fourth IP Address
CLI: fourth-ip-address
[Dns2Ip_FourthIpAddress]

12.8.2 Configuring the Internal SRV Table

The Internal SRV table resolves host names to DNS A-Records. Three different A-Records
can be assigned to each host name, where each A-Record contains the host name,
priority, weight, and port.
Note:
domain name using this table. If the domain is not configured in the table, the device
performs a Service Record (SRV) resolution using an external DNS server,
configured in the Interface table (see ''Configuring IP Network Interfaces'' on page
116).
The following procedure describes how to configure the Internal SRV table in the Web
interface. You can also configure this using the table ini file parameter, SRV2IP or CLI
command, configure voip > voip-network dns srv2ip.
Version 6.8
Table 12-18: Internal DNS Table Parameter Description
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Defines the first IP address (in dotted-decimal format notation) to
which the host name is translated. The IP address can be
configured as an IPv4 and/or IPv6 address.
Defines the second IP address (in dotted-decimal format notation)
to which the host name is translated.
Defines the third IP address (in dotted-decimal format notation) to
which the host name is translated.
Defines the fourth IP address (in dotted-decimal format notation) to
which the host name is translated.
If you configure the Internal SRV table, the device initially attempts to resolve a
Description
131 Mediant 1000B Gateway & SBC
12. Network