Configuring To Output System Information To The Log Buffer - H3C S5500-SI Series Operation Manual

Hide thumbs Also See for S5500-SI Series:
Table of Contents

Advertisement

Operation Manual – Information Center
H3C S5500-SI Series Ethernet Switches
Name the channel with a
specified channel number
Configure
information to be output to
a
trap
configure the associated
parameters
Configure the source of
the output information
Configure the format of
the time stamp

1.2.5 Configuring to Output System Information to the Log Buffer

Follow these steps to configure to output system information to the log buffer:
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure
through
information can be output
to the log buffer and
specify the buffer size
To do...
info-center
channel-number
channel-name
system
info-center
[
buffer
and
{
channel-name } | size
buffersize ] *
info-center
{ modu-name | default }
channel
{
channel-name } [ debug
{ level severity | state
state }* | log { level
severity | state state }* |
trap { level severity |
state state }* ]*
info-center
{ log | trap | debugging }
{ boot | date | none }
To do...
system-view
info-center enable
info-center
channel-number
channel-name
the
channel
info-center
which
system
[
{
channel-name } | size
buffersize ]*
Chapter 1 Information Center Configuration
Use the command...
channel
name
trapbuffer
channel
channel-number
source
channel-number
timestamp
Use the command...
channel
name
logbuffer
channel
channel-number
1-9
Remarks
Optional
Refer to Table 1-3 for
default channel names
Optional
System
information
output to the trap buffer by
|
default with channel 3
(known as trapbuffer) as
the default channel and a
default buffer size of 256
|
Required
Optional
By default, the time stamp
for
log
and
information is date and
that
for
debugging
information is boot.
Remarks
Optional
Enabled by default
Optional
Refer to Table 1-3 for
default channel names
Optional
System
information
output to the log buffer by
|
default with channel 4
(known as logbuffer) as
the default channel and a
default buffer size of 512.
is
trap
is

Advertisement

Table of Contents
loading

Table of Contents