Operation Settings (Operation Menu) - Sony MVS-8000 User Manual

2
3
4

Operation Settings (Operation Menu)

To make settings relating to panel operation, use the Panel >Operation menu.
To display the Operation menu
In the Engineering Setup menu, select VF2 'Panel' and HF6 'Operation.'
The status area shows the items that can be set and a list of the settings.
Setting the on-air tally
To set the high tally state reflected on the control panel, use the following
procedure.
1
2
374
Setup Relating to Operations From the Control Panel
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 No Serial port selection
a) The range of the setting value depends on the DCU port settings.
Turn the knob to select the device selection button (DEV1 to DEV12) for
sharing the file list.
Knob Parameter Adjustment
2 File List Device selection button for
sharing the file list
Press [Same File List Set].
This is reflected in the file list in the status area.
Repeat steps 1 to 3 as required to select other devices for sharing the file
list.
In the Panel >Operation menu, press [Button Tally].
The Button Tally menu appears.
In the <Tally Type> group, select either of the following.
[R1] to [R8]: Reflect any of tally groups 1 to 8 as the tally state.
Independent: Reflect only the switcher tally state.
Setting values
a)
1 and upwards
Setting values
1 to 12