Table of Contents
Advertisement
1-6. Installing Menu Panel
The menu panel MKS-8011A can be installed to the
monitor arm compliant with VESA Standard using the
adapter supplied with CCP-8000. See the dimensions for
installation below.
Adapter installation dimensions
(compliant with VESA Standard)
75 mm
4-M4
The following parts supplied with CCP-8000 are required
to install the menu panel.
n
Use the specified accessories when installing the menu
panel.
. Adapter
. 50-pin cable
. Screws B3 x 5 (4)
. Screws B4 x 8 (4)
1-14
100 mm
4-M4
Installation
n
Connect the attached 50-pin cable to the menu panel, and
then perform the following steps.
1. Install the adapter to the menu panel with the attached
four screws (B3 x 5).
Adapter
B3 x 5
Menu panel
2. Install a commercially available monitor arm to the
adapter with the attached four screws (B4 x 8).
n
For installation of monitor arm, refer to its operation
manual.
100 mm
75 mm
Adapter
75 mm
100 mm
B3 x 5
50-pin cable
B4 x 8
B4 x 8
Monitor arm
CCP-8000 IM
Hide quick links:
Advertisement
Table of Contents
