Auxiliary Bus Control Block Settings (Aux Assign Menu) - Sony MVS-8000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for MVS-8000:

Table of Contents

If a macro attachment is set, when you assign the button to the side flag

function, the button numbers are offset, and therefore when you press the

button this does not execute the macro. The settings, however, are maintained,

so that when you cancel the side flag assignment, the macro can be accessed

SHIFT button moves

one to the left

For details of side flag operations, see Chapter 10 "Side Flag Settings"

In the Panel >XPT Assign menu, press [Side Flags Button Assign].

The Side Flags Button Assign menu appears.

Press [Side Flags Btn Assign], turning it on.

This assigns the rightmost cross-point button to enabling/disabling the side

flag function.

Auxiliary Bus Control Block Settings (Aux Assign

To carry out the settings of the AUX delegation buttons in the auxiliary bus

control block, use the Panel >Aux Assign menu.

Button for side flags

enable/disable

Setup Relating to Operations From the Control Panel

Show Quick Links

Table of Contents